smd shielded power chip inductor 15 rdc (m) allied part number inductance ( h) tolerance (%) test freq. allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs revised 06/06/12 khz, 1v all specifications subject to change without notice. irms PCSV52-1R0T-RC 1.0 30 100 21 4.0 features ? magnetically shielded construction electrical test equipment physical packaging: 2000 per tape and reel ? ultra low profile inductance range: 1.0h ~ 22h (other tolerance: available in 20% and 30% tolerance operating temp: -25oc ~ +105oc isat: current at which the inductance will drop resistance to soldering heat pre-heat 150oc, 1 min. solder temp: 260oc +/- 5oc for 10 sec (l): agilent/hp4284a + agilent/hp16334a (rdc): chroma milliohm meter mode 16502 current: isat: hp4284a + hp42841a marking: eia inductance code pcsv52 (a) isat (a) 5.1 irms: based on a temp rise of t = 40oc solder composition: sn/ag3.0/cu0.5 values being added) by no more then 30% of its initial value. pcsv52-1r5t-rc 1.5 30 100 26 3.5 4.2 pcsv52-2r2t-rc 2.2 30 100 35 3.2 3.4 pcsv52-3r3m-rc 3.3 20 100 48 2.8 3.0 pcsv52-4r7m-rc 4.7 20 100 60 2.2 2.2 pcsv52-6r8m-rc 6.8 20 100 90 1.8 2.0 pcsv52-100m-rc 10 20 100 120 1.6 1.6 pcsv52-150m-rc 15 20 100 190 1.2 1.3 ? typical at 25oc ambient. 20% typ. typ. marking 1r0 1r5 2r2 3r3 4r7 6r8 100 150 pcsv52-220m-rc 22 20 100 260 1.0 1.0 220 .197.008 (5.00.2) as noted. irms: agilent 6641 system dc power supply dimensions: inches (mm) .197.008 (5.00.2) .079.008 (2.00.2) .071.012 (1.80.3) .071.012 (1.80.3) .157 typ. (4.0 typ.)
|